PRL Motorsports 2022+ Honda Civic Turbo Inlet Titanium Tube High Volume Intake
Description
Maximize your 11th Gen Acura Integra's engine intake system and turbocharger potential with the PRL Motorsports Titanium Turbocharger Inlet Pipe Kit for the L15CA. This kit is a direct bolt-on upgrade that eliminates intake airflow restriction before the turbocharger, allowing the turbocharger to operate more efficiently.
Thin-wall Titanium keeps helps reduce heat-soak. Our design utilizes a cast aluminum inlet piece to allow smooth transition from the gasket-matched compressor inlet to a 76.2mm OD / 74mm ID outlet throughout the Titanium crossover pipe.
We designed this kit to compliment Honda's 1.5L displacement perfectly by providing a significant increase in airflow volume in comparison to the factory inlet pipe, while maintaining velocity. A multi-piece design allows for easier installation and better fitment than a one-piece design.
This kit is a direct bolt-on upgrade for factory turbocharger and factory replacement drop-in turbocharger upgrades.
Fits all 2022+ Honda Civic 1.5T Fits all 2023+ Acura Integra 1.5T Fits all variant models including Si, CVT, 6MT, RHD, International Models, Etc.
Important Notes:
- No ECU Calibration Required
- Fits PRL High Volume Intake System
Technical Notes:
- 1 Cast Aluminum Inlet Piece
- 1 76mm OD Titanium Inlet Pipe
- 2 High-Temp 4-Ply Silicone Couplers
- 304 Stainless Steel Interlocking Worm Clamps
- Vacuum Hoses
- 1 Injection Molded Fitting
- Buna O-Rings
- Requires use of PRL High Volume Intake or Short Ram Intake System
Additional Description
- CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 1.5 Liter
Description
Maximize your 11th Gen Acura Integra's engine intake system and turbocharger potential with the PRL Motorsports Titanium Turbocharger Inlet Pipe Kit for the L15CA. This kit is a direct bolt-on upgrade that eliminates intake airflow restriction before the turbocharger, allowing the turbocharger to operate more efficiently.
Thin-wall Titanium keeps helps reduce heat-soak. Our design utilizes a cast aluminum inlet piece to allow smooth transition from the gasket-matched compressor inlet to a 76.2mm OD / 74mm ID outlet throughout the Titanium crossover pipe.
We designed this kit to compliment Honda's 1.5L displacement perfectly by providing a significant increase in airflow volume in comparison to the factory inlet pipe, while maintaining velocity. A multi-piece design allows for easier installation and better fitment than a one-piece design.
This kit is a direct bolt-on upgrade for factory turbocharger and factory replacement drop-in turbocharger upgrades.
Fits all 2022+ Honda Civic 1.5T Fits all 2023+ Acura Integra 1.5T Fits all variant models including Si, CVT, 6MT, RHD, International Models, Etc.
Important Notes:
- No ECU Calibration Required
- Fits PRL High Volume Intake System
Technical Notes:
- 1 Cast Aluminum Inlet Piece
- 1 76mm OD Titanium Inlet Pipe
- 2 High-Temp 4-Ply Silicone Couplers
- 304 Stainless Steel Interlocking Worm Clamps
- Vacuum Hoses
- 1 Injection Molded Fitting
- Buna O-Rings
- Requires use of PRL High Volume Intake or Short Ram Intake System
Additional Description
- CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 1.5 Liter
Description
Description
Maximize your 11th Gen Acura Integra's engine intake system and turbocharger potential with the PRL Motorsports Titanium Turbocharger Inlet Pipe Kit for the L15CA. This kit is a direct bolt-on upgrade that eliminates intake airflow restriction before the turbocharger, allowing the turbocharger to operate more efficiently.
Thin-wall Titanium keeps helps reduce heat-soak. Our design utilizes a cast aluminum inlet piece to allow smooth transition from the gasket-matched compressor inlet to a 76.2mm OD / 74mm ID outlet throughout the Titanium crossover pipe.
We designed this kit to compliment Honda's 1.5L displacement perfectly by providing a significant increase in airflow volume in comparison to the factory inlet pipe, while maintaining velocity. A multi-piece design allows for easier installation and better fitment than a one-piece design.
This kit is a direct bolt-on upgrade for factory turbocharger and factory replacement drop-in turbocharger upgrades.
Fits all 2022+ Honda Civic 1.5T Fits all 2023+ Acura Integra 1.5T Fits all variant models including Si, CVT, 6MT, RHD, International Models, Etc.
Important Notes:
- No ECU Calibration Required
- Fits PRL High Volume Intake System
Technical Notes:
- 1 Cast Aluminum Inlet Piece
- 1 76mm OD Titanium Inlet Pipe
- 2 High-Temp 4-Ply Silicone Couplers
- 304 Stainless Steel Interlocking Worm Clamps
- Vacuum Hoses
- 1 Injection Molded Fitting
- Buna O-Rings
- Requires use of PRL High Volume Intake or Short Ram Intake System
Additional Description
- CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 1.5 Liter
