PRL Motorsports 2018+ Honda Accord 2.0T Charge Pipe Upgrade Kit
Description
Fits all 2018-2022 Honda Accord 2.0T, Fits all variant models including 10AT, 6MT, RHD, International Models, Etc.
Important Notes:
- No ECU Calibration Required
Technical Notes:
Our upgraded charge pipe kit utilizes smooth flowing, larger inner diameter cold-side 1.5 Inch factory compared to 2.5 Inch tubing for increased airflow and factory diameter hot-side outlet to aid in turbocharger spool.
4-ply silicone couplers are used throughout our design for a couple of reasons:
Heat-soak reduction: Silicone hose offers extremely low thermal heat transfer properties, especially in comparison to steel or aluminum.
Strength and rigidity: The rubber hoses used from the factory are known to experience expansion, which worsens as boost is increased. In time, the rubber construct weakens, causing increased likeliness of a boost leak.
Our high-temp, 4-ply silicone with handle the high temperatures of the turbocharger much better than the factory rubber hoses.
Smooth airflow: Custom molded silicone allows us to offer much higher flowing bends than we could with metal tubing.
Optimal fitment: We have found that the factory rubbers hoses don't offer the most desirable fitment, especially when paired with an aftermarket radiator. Our silicone hoses offer even better fitment than factory.
Performance Gains:
Increased efficiency and consistency in power delivery
Kit Includes:
- 1 Cold Side Charge Pipe w/ Machined Billet Aluminum Flange
- 1 Lower Cold Side Charge Pipe w/ Auxiliary Service Port
- 1 1/8 inch NPT Pipe Plug Pre-Installed in Auxiliary Service Port
- 4 4-Ply Silicone Coupler
- 8 304 Stainless Steel Worm Clamp
Additional Description
- 6061 Aluminum
- CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 2.0 Liter
Description
Fits all 2018-2022 Honda Accord 2.0T, Fits all variant models including 10AT, 6MT, RHD, International Models, Etc.
Important Notes:
- No ECU Calibration Required
Technical Notes:
Our upgraded charge pipe kit utilizes smooth flowing, larger inner diameter cold-side 1.5 Inch factory compared to 2.5 Inch tubing for increased airflow and factory diameter hot-side outlet to aid in turbocharger spool.
4-ply silicone couplers are used throughout our design for a couple of reasons:
Heat-soak reduction: Silicone hose offers extremely low thermal heat transfer properties, especially in comparison to steel or aluminum.
Strength and rigidity: The rubber hoses used from the factory are known to experience expansion, which worsens as boost is increased. In time, the rubber construct weakens, causing increased likeliness of a boost leak.
Our high-temp, 4-ply silicone with handle the high temperatures of the turbocharger much better than the factory rubber hoses.
Smooth airflow: Custom molded silicone allows us to offer much higher flowing bends than we could with metal tubing.
Optimal fitment: We have found that the factory rubbers hoses don't offer the most desirable fitment, especially when paired with an aftermarket radiator. Our silicone hoses offer even better fitment than factory.
Performance Gains:
Increased efficiency and consistency in power delivery
Kit Includes:
- 1 Cold Side Charge Pipe w/ Machined Billet Aluminum Flange
- 1 Lower Cold Side Charge Pipe w/ Auxiliary Service Port
- 1 1/8 inch NPT Pipe Plug Pre-Installed in Auxiliary Service Port
- 4 4-Ply Silicone Coupler
- 8 304 Stainless Steel Worm Clamp
Additional Description
- 6061 Aluminum
- CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 2.0 Liter
Original: $429.00
-70%$429.00
$128.70Description
Description
Fits all 2018-2022 Honda Accord 2.0T, Fits all variant models including 10AT, 6MT, RHD, International Models, Etc.
Important Notes:
- No ECU Calibration Required
Technical Notes:
Our upgraded charge pipe kit utilizes smooth flowing, larger inner diameter cold-side 1.5 Inch factory compared to 2.5 Inch tubing for increased airflow and factory diameter hot-side outlet to aid in turbocharger spool.
4-ply silicone couplers are used throughout our design for a couple of reasons:
Heat-soak reduction: Silicone hose offers extremely low thermal heat transfer properties, especially in comparison to steel or aluminum.
Strength and rigidity: The rubber hoses used from the factory are known to experience expansion, which worsens as boost is increased. In time, the rubber construct weakens, causing increased likeliness of a boost leak.
Our high-temp, 4-ply silicone with handle the high temperatures of the turbocharger much better than the factory rubber hoses.
Smooth airflow: Custom molded silicone allows us to offer much higher flowing bends than we could with metal tubing.
Optimal fitment: We have found that the factory rubbers hoses don't offer the most desirable fitment, especially when paired with an aftermarket radiator. Our silicone hoses offer even better fitment than factory.
Performance Gains:
Increased efficiency and consistency in power delivery
Kit Includes:
- 1 Cold Side Charge Pipe w/ Machined Billet Aluminum Flange
- 1 Lower Cold Side Charge Pipe w/ Auxiliary Service Port
- 1 1/8 inch NPT Pipe Plug Pre-Installed in Auxiliary Service Port
- 4 4-Ply Silicone Coupler
- 8 304 Stainless Steel Worm Clamp
Additional Description
- 6061 Aluminum
- CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 2.0 Liter
