Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug. Please note proper CAN protocol must be followed. See manual below for guidance. Download the CAN-Lambda QuickStart Guide Download the CAN-Lambda manual The CAN-Lambda’s ability to measure the proportion of oxygen in exhaust gases makes it an essential tool for accurately tuning fuel mixtures as well allowing your ECU to make tuning adjustments on the fly. Being fully digital the CAN Lambda’s powerful LSU 4.9 sensor will eliminate any loss of signal, risk, delays and errors that analogue alternatives cause. The CAN-Lambda never requires free air calibration. Box Contents CAN Lambda device Bosch LSU4.9 Sensor Deutsch 4-Way Connector Kit O2 Bung and Plug 2 Large Stickers 2 Small Stickers Quick Start Guide Specifications _x000D_ _x000D_ 1 x 4 pin male DTM connector (power/CAN) _x000D_ 1 x 6 pin mating connector for LSU 4.9 Lambda sensor _x000D_ _x000D_ _x000D_ Dimensions _x000D_ Enclosure 60 x 26 x 15mm _x000D_ Lead length 170mm _x000D_ Weight 70g _x000D_ Input Voltage _x000D_ Controller 7.5 - 20 V _x000D_ Sensor 10.8 - 16.5 V _x000D_ Input Current _x000D_ Controller 100 mA _x000D_ Sensor Heater 8 A _x000D_ Operating Temp -20 - 100 deg.C _x000D_ Sensor Bosch LSU4.9 _x000D_ Sensing Range 0.67 - 10 lambda _x000D_ CAN Frequency 1Mb/s,500kb/s,250kb/s,125kb/s _x000D_